|
It only takes a few moments to take the
maybe Baby™ test. To find out more
follow the instructions and images below.
1. Ensure you have not had anything to eat
or drink for at least 3 hours prior to using
maybe Baby™ (water is fine).
2. Remove the protective cover.
3. PULL the viewfinder (lens) from the
housing but DO NOT unscrew the eyepiece (roating
part of the viewfinder). To view the
maybe Baby™ Parts
.
4. Clean the flat internal glass surface of
the viewfinder with the lint free cloth
provided. Do NOT use water, cleaning
products or other cloth as this may scratch
the lens.
5. Using a clean fingertip place a smear of
saliva over the flat internal glass
surface of the viewfinder. Make sure
there are no bubbles of saliva on the lens.
6. Leave the saliva to dry for approximately
10 minutes. The indication of oestrogen in
the saliva (i.e. the fern like pattern) will
only appear in a dry saliva sample.
7. Replace the viewfinder.
8. Hold the maybe Baby™ up close to
your eye.
9. Press the light switch on the bottom of
the maybe Baby™ .
10. View the results through the viewfinder.
11. Please note that the results will NOT be
black. The pebble/fern pattern will be
translucent/greyish against the green
background and very obvious. |
